What do I need to buy to deep fry a turkey?
Tools You Need
It includes an outdoor burner, a 30-quart pot, a deep-frying thermometer to monitor oil temperature and a rack with a hook to slow lower the turkey into the oil.
How much oil do you need to deep fry a turkey?
Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.
What kind of oil do you use to fry a turkey?
The USDA notes that turkey needs to be fried at a temperature of 350 degrees Fahrenheit, so you need to use an oil that has a smoke point higher than 350 F. The USDA lists the smoke points of oils that can be used for deep-frying: Olive, sesame seed, corn and sunflower oil: 410 F.
How do you deep fry a turkey?
When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.
When should I inject my turkey before frying?
Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.
Do you have to use peanut oil when frying turkey?
Which Oil Should You Use to Fry Turkey? Peanut oil is the best oil for deep frying turkey because its high flash point makes it less likely to catch on fire. The best oil for fried turkey should also be low in saturated fat because the turkey will absorb a small amount of oil as it cooks.
Can you reuse peanut oil after deep frying?
Generally speaking, reusing the peanut oil is fine. … First, remove any food particles from the oil after frying. Second, frying causes the quality of oil to deteriorate, so after a few uses, the oil won’t be as good as it was to begin with. Third, oil tends to take some of the flavors of food fried in it.
Can you fry a turkey in vegetable oil?
Deep-frying makes the turkey crispy on the outside and super juicy on the inside (even the white meat). It also leaves the heat outside! You can deep-fry the turkey in either peanut or vegetable oil, your choice.
What oil is used for deep frying?
Vegetable oil is the best oil for deep frying. Canola oil and peanut oil are other popular options. While vegetable oil, canola oil, and peanut oil are the most popular oils for deep frying, there are several other oil options you can choose: Grapeseed Oil.
Can you mix peanut oil with vegetable oil to fry a turkey?
Yes, you can mix peanut oil and vegetable oil while cooking. Both will easily dissolve in each other.
Can I use peanut oil for deep frying?
Peanut oil, also known as groundnut oil, has a high smoke point of about 446°F (230°C). It’s popular for deep frying because it has a neutral taste ( 11 ).
How do you deep-fry a turkey in canola oil?
Deep Frying Tips:
- Preheat oil to 375°F (190°C). …
- Using oven mitts and a turkey basket or holder, CAREFULLY lower the turkey into the oil. …
- Estimate 3 minutes per pound – a 10 lb turkey takes approximately 30 minutes to deep-fry.