Place the turkey in the fryer and cover it with water to measure the oil you’ll need. The turkey should be covered by about 1⁄2 inch (1.3 cm) of water, and you should have 5 inches (13 cm) between the water level and the top of the fryer.
Should you put the lid on when deep frying a turkey?
Once the fryer is lit, turn the burner up all the way. You do this by turning the hose regulator valve (the red one) to the left. Then put the lid on the pot and let the oil heat to 350°F. … Your oil WILL heat without a lid if you don’t have one, it’ll just take longer.
How long do you fry a turkey?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
How much oil do you need to fry a turkey?
Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.
What temperature should I fry my turkey?
When cooking turkey parts, oil temperature should be 325° F; may take 4 to 5 minutes per pound to reach the recommended temperatures (dark meat to an internal temperature of 175° F to 180° F, and white meat to an internal temperature of 165° F to 170° F). You’ll need 2.5-3 gallons of oil.
How do you dry a turkey before frying it?
Cover and set in a cool dry place for 8 to 16 hours. Remove the turkey from the brine, rinse and pat dry. Allow to sit at room temperature for at least 30 minutes prior to cooking.
When frying a turkey which end goes in first?
The turkey should be placed in basket neck end first. Slowly lower basket into hot oil to completely cover turkey. Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes.
Do you have to use peanut oil when frying turkey?
Which Oil Should You Use to Fry Turkey? Peanut oil is the best oil for deep frying turkey because its high flash point makes it less likely to catch on fire. The best oil for fried turkey should also be low in saturated fat because the turkey will absorb a small amount of oil as it cooks.
Why do deep fried turkeys explode?
The reason frozen turkeys explode, at its core, has to do with differences in density. There is a difference in density between oil and water and differences in the density of water between its solid, liquid and gas states. When these density differences interact in just the right way, you get an explosion.
Can I use peanut oil for deep frying?
Peanut oil, also known as groundnut oil, has a high smoke point of about 446°F (230°C). It’s popular for deep frying because it has a neutral taste ( 11 ).
Can you reuse peanut oil after deep frying?
Generally speaking, reusing the peanut oil is fine. … First, remove any food particles from the oil after frying. Second, frying causes the quality of oil to deteriorate, so after a few uses, the oil won’t be as good as it was to begin with. Third, oil tends to take some of the flavors of food fried in it.
Can you reuse oil from frying a turkey?
Don’t let that deter you because you can reuse oil for frying. Under normal conditions, oil can be heated for up to six hours. A deep-fried turkey can cook in under an hour (three minutes per pound) so you can fry six items on six different occasions with a single batch of oil.
What do you do with the oil after frying a turkey?
1) Allow the oil to cool down post-meal. 2) Then, pour it into an unbreakable, sealable container. 3) Seal the lid tightly and throw it away with the rest of your trash. 4) A post-cooking oil disposal dance is optional.